I have like 4 sets of channels made I will sell. I also make the upper hinges but dont have any at the ready but I have time maybe this week ill...
Second test ride today works pretty good had a fuel leak pulled the tank off to fix. I guess i need to tighten the chain aswell. Very happy with...
When I first rebuilt my 2a the cork seal for the sender disintegrated and kept clogging the line. I had to stop all the time and take line off the...
I think id start by replacing the oil pump. Nothing to loose. What oil are you running?
Nice my neighbor has one he had since he was a kid in the 70s his sone rode it and now he restored it for his grandkid. He couldnt get it running...
Almost done just have to finish the tank mounting and do some decals.
Only put one on if you need it. It makes the steering harder offroad. But if it whips the steering wheel out of your hands alot from hitting stuff...
They do tend to loosen up I suggest good lock washers and lock tite. Im not a torque wrench kinda guy
The ridge was so big on my mini i used the grinder to take it off. like 1/16th easily. It should go to the machine shop but aint nobody got time...
My fat bike is almost done. I finished the seat it came out great. I test rode the bike it works good. ow just have to finish the paint job and...
Do you have to anneal the copper gaskets? Often times on small engines they leak because they are too hard. I used a fel-pro on mine after the...
From my understanding not entirely true. If the tires are tube type they lack an inner layer that a tube provides. Air will actually leak through...
I feel like this is how most body swaps end up and people just dont post pictures of their "progress" once they realize its fu#ed
Pressure switches these days are junk. I replaced mine 4 or 5 times over the years. Last time it shorted out and boiled the fluid so it had no...
My 67 doesnt have them on the axle either I just assumed they went away with the dana 44
I revived this yamaha trike my friend brought me. It just needed alot of little tinkering the main expense was the rear tires. I scraped all the...
Yeah I quit buying new steel years ago luckily i come across enough scrap steel to do what I need. I boxed mine in the back up to the crossmember...
The mustang looks like fun! My friends dad has a 67 mustang he had since the 80s drove it back to ny from ca. Its all resored now it took him...
That worm gear looks brand new compared to mine and last time i was in there was 15 years ago. Rotate the pins and call it good! I wouldnt use a...
Iv been through 4 or 5 mufflers over the years. They all rust out eventually. Always used the factory style crossover pipe over the skid plate...
Separate names with a comma.