got my redone OE bus stering wheel on the 75 thanx to you guys. the guy i got it from had a space at a jeep show. I got a good price on the wheel...
done! sawzall plus 2 min = victory. thanks.
258?
I dont care if I destroy the old wheel. anyone try a sawzall? one nice cut parallel with the splines should do it?
come on! theres got to be an easy way out. i think ill just pull the shaft and drag it to work with me behind the yj. think that would do it?
yes stock bus wheel
75 with the stock wheel. got the 1.25 nut off but it looks like a puller wont work. tryed a BFH butt i fear i might break something else. anyone...
i would love to go to a smaller wheel but I cant get mine off. tryed my 2 jaw gear puller, just cracks the plastic. Tryed a BFH but i dont want to...
first, timgr your knowlege of jeeps is part of why im at this site. you take the time and have the insight to help people with there jeeps. thax....
so the thing is you just put it on and go from there. what ever it takes to get it right. i dont want to spend 300$ on a new shaft, thought i may...
im buying a lift this week. 2.5 or 3". iknow im talking abought a .5" but what are the additional thing i need for a 3". dont think anything but...
got it. much better fit than the old one to. not sure why the po (set) that one on there.
ran on the road for 45 mi with no air cleaner at highway speed. i hit a big hole and it fell off. went back to get it but it was in the center of...
try rockauto.com. there is alot of parts places out there. i had a really good one with pics and all but it look like i lost the name.
thanks guys . new batt and a reman alt. i made the guy test the alt to make sure it was good. however you have a good point, i got a bad starter...
yea. thank for all your help. i want to rewire anyway but i want a fiberglass tub to. then it gets to ss fuel line,paint frame, disc brakes, roll...
with all the fuses out i can see a small spark when i reconnect the pos. batt, cable.
pulled all fuses got like 5 amps post to cable. hooked the batt back up before i took out the fuses and my radio and int. lights did not work....
ok tryed that with no luck. with the jeep off dissconected pos. batt cable tested voltage from pos. batt. post to pos. batt cable. like 13 volts...
ok your on to somthing. ill let you know how that turns out. thanks
Separate names with a comma.