this might sound silly but chek your fuel lines I've been through this myself and all it was is a flap on the inside of the fuel line:roll:fuel...
my 75 with a 304 has a rod coming from the back of the pedal down to the linkage on the frame (bellcrank) that goes across to the rod that pushes...
mine did the same thing all it was is that the pin that holds the linkage together fell out or was forgoten
I got a set with my 75 don't know what they are or do eather just thought the po was cleaning his shop now you have me wondering
hi again the chart I have is a little blurry but I will try yellow goes to a splice that hooks to a red/wtr that comes from ign and at splice...
the best I could do was take a picture and color it the one on the left is red with a white stripe goes to the ecu the red off the alt goes to a...
the info I gave you was for a 76 I got the jeep in peaces took my forever to figger out what I had there was parts of three different wiring...
[ATTACH]this is the back end of my 75 it doesn't have the cross brace my 66 had
red to bat green to fld yellow splices in to fusible link on red at solenoid I had to hook the sta post to a hot wire through the ignition to...
does your brake pedal have any play in it? there is a little tiny hole in the end of the master cylinder if the push rod is too tight it can't...
that looks the same as my 75 dash
Separate names with a comma.