Thats what Im talking about!!!!.........thanks Mike I'll call him tomorrow.......Vic
Try Harmon 4 wheel drive in Tulsa, ask for Eric, I know he has a bunch of selectro parts.....Vic
Im guessing the lever is a simple "in and out" what purpose would the solinoids play?..........
I'll research this a little more, if it goes your first up chilli, Vic
You know more than I do, you identified it in about 10 seconds, thanks again..........Vic p.s. tell your dad I got parts.....lol
Jim, I see, do you think with a sbc powering this thing any benefit would be gained with keeping the rpms down on highway use? or would it...
Jim, why are they not practical? why do you have OD in yours?...thanks Vic
thats the critter.......any opinions?............Vic
I'll get a pic tomorrow, this really does not look aftermarket it looks "aged" with the transfer case was this a factory option?...and are they...
I scored a cj3 today with a bunch of parts, while looking at one of my new transmissions/transfer case I saw something I have never seen, it...
Mike, The bendix is available as a replacement part, pull your starter off and try it on a bench to be sure its spinning OK, check...
If you dont need exact originals, 80's and early 90's model Ford delivery/service vans have some good ones they are low back but still contoured,...
I like to get in line on the top if rondog passes on it, Im in Tahlequah.....Vic
I have the same set up in a 55cj, my son is 12 and he has no problems abusing it, he has skinny arms and is running 31's under it and will drive...
I went with an electric in my 134F w/solex, just to break it in and I have not got around to changing it, the pump says 5-9lbs of pressure and it...
Tommy, Im having to extend the wheel bracket to accomodate the 31's I'll get em to ya when it finished, should be after Christmas.......Vic
I can get some pics later in the week, I would use the bar stock no matter which way you go, just pound it through the existing hole in your...
If you have access to a salvage yard, look at the spare tire mount on a Suzuki Samari or any of the little jap suv's, the one from the Samuri has...
This is the same set up we use simple gravity feed, with a valve for adjustment about 5 feet of 1 1/4 pipe, oil resivoir is outside, stove heats...
does it involve a freezer and a torch..........Vic
Separate names with a comma.