To bad I have a sbc I would buy that advanced adapters bell from you.
I did notice that If I tapped straight through, it would be half on the inner ridge and half off. I don't know how strong the plug would be either...
I am getting ready to do the same thing that you did. I read on novak to just drill and tap a hole. Nobody said anything about welding in a plug....
I will try that before I put the new ones in to see if that was the problem.
I hope that that is the problem I don't really see what else it could be, it has me worried though because I tried a condenser that I had laying...
Hello I have been having some issues with my odd fire. It was running fine and then all of a sudden it just wouldn't start (luckily I was at...
You might want to borrow an impact that runs off 110 they will usually have more power. I've broken a few bolts in half loosening and tightening nuts.
Brake booster 89 ranger M.c. 89 ranger Front and rear stock Dana 44 s off a 79 wagoneer the fronts are discs with new pads, the rear are drums...
Sorry guys, I have a 60 cj 5 with two Dana 44 s on it. The front axle has disc brakes, I am using a booster off of a ranger m.c. is also off the...
I have a set of Dan 44 s front and rear and have converted over to a vacuum assist off of a ford ranger. I am using a rear prop valve but don't...
Separate names with a comma.