I have a 71 cj5 with a th350/v6. I love it! I'm not sure of the length of the rear drive shaft but the angle is good. Feel free to contact me and...
Here is a update. I replaced the throttle body and now it idles great. The new problem is that I have a dead spot(bog) just off idle. I has set...
Is 12v ok. Thought it was like 9v to the coil. But I think you are on to something. I'll try it this afternoon.
I'm 100% sure it can be done (th350 in a cj5) cause I did it. It all started when I went out of town and when I came home the jeep had a dead...
Stock dizzy. The points window is between the 1 and 2 tower on the cap I set the timing at 10 cause of the auto transmission. It's real rough idle 0-5
Stock dizzy. I set the timing at 10 cause of the auto transmission. It's real rough idle 0-5
Yes 4 whole turns. It will not idle at 2 turns. I will check the plugs this afternoon.
I blow out the idle mix screw holes and double checked the float and pump. All looks good. I still have a dead spot off idle and will not idle...
That's what it acts like but i sprayed carb cleaner all over the motor and nothing..
71 cj5 with a 225 with th350 and 2g carb. I rebuilt the carb with all new part(power piston,power valve,brass float and .51 jets). I have set the...
I put a th350 in my 71 with a 225 and a d18 case earlier this year. I love it!! The hardest part of it was gathering all the parts. Timgr is right...
Would like tilt and I think it would look better. I don't like the way the stock one looks. Reminds me of my golf cart. [IMG]
Has anyone done a GM cloumn to ross sterring box. i know it's not easy but can it be done? Any info would be great..
Separate names with a comma.