I've got a '73 as well and the first thing I modified on my Jeep was the steering. I had the same problem and it was really scary to drive on the...
I have a centerforce II in my '73 CJ with a 304. I pulled my engine last week for a rebuild and the clutch has very little wear. It's been in my...
I have a Millermatic 135 with gas and it is great. I'm fairly new to welding but have had no problems with this little machine. I don't think...
I had the same problem when I exited mine to the sides. I bought in-frame headers and had the exhaust routed to the rear corners. It was a great...
My recomendation is to first purchase the Chilton's manual. My Chilton's has many miles on it from looking at the wiring diagrams. I wish I had...
Thanks for the advice. I've got extended brake lines so I don't think that would be a problem. I'm sure I'd have to replace shocks though....
Just started thinking of buying the revolver shackles for increased articulation. I've heard pretty good things about them but wanted to get...
Try dropping a line to George's Jeep Parts. His web site is www.willys.net. I've purchased parts from him before and he's really helpful. He's...
I also have a '73 CJ5 and when I purchased it and drove it the two hour drive home I had my life flash in front of me every time a big truck...
When posting threads like this there is always some block head that always suggests upgrades that you really don't want to do but let me be that...
I'm glad to hear it went well. Mine was pretty easy too. I paid to have it done the first time and he messed it up. I wish I would have...
I'm not so sure if the 6 is a two piece seal but in my 304 I just pulled the oil pan, took off the back bearing cap, and removed the seal. It was...
I've got a procomp 2 1/2 with 1 1/4 shackles and a 2 inch body lift. I wanted to only go with a 1 inch body but had problems with my stearing...
I've got a '73 CJ5 with a V8 and really like the power. If the $ is there go with the V8. My .02. Good luck...Casey
Thanks for all the feedback. I was thinking it might be time to take the hubs apart and service them. Casey
I've tried that with no luck. I'll try it again and see how it works out.
I've been living with this problem for a while now and it's starting to bother me. When I shift into 4 low I can't get it out of 4WD without...
I'm always looking for a project but that looks like it's more than I'd be willing to take on, especially for $500. I recently bought an old...
I'd agree with everyone. Looks like about 3 inches. I've got a 2 1/2 inch Procomp with 1 1/4 inch shackles and it looks like it's about as tall...
I replaced the plugs again, adjusted the ECU, and added the closed loop kit which is simply an O2 sensor. My Jeep has found new life! Anyone...
Separate names with a comma.