my 74 5 would run rich and stall underload. after it warmed-up it would stall and flood. i tweaked and rebuilt my carb, no luck. i thought i...
thanks for the replies.... i was going to upgrade my headlights too so when i do that it may be problem solved. as much as i like the idea of...
ok guys, here's the question: i have a 74 cj5, 232 i-6, stock alternator and a pair of 6" round aircraft landing lights i want to mount on my...
i installed the outland/smittybilt high backs. i fabed a bracket so i could re-use my original seat brakets with the new seats. they do not fold...
i installed the smittybilt/outlander highback seats in my 5 and love them. i have the original low-backs and a set of new un-installed...
from the arkasnas DMV "Description: Specialty license plate for antique (25 years or older) vehicle. Eligibility: For historical or special...
i have antique tags and the state minimum insuance for arkansas on my 74. the tag was around $20 and never expires (main reason i got it). i had...
boyink, it was from 4wd.com part number #716127 Polished Alum W/S Latch Kit $68.95...
when i replaced mine i also up-graded to the newer style windshield clamps that screw instead of latch. i found them in 4wd as a direct...
i have a 74 232 i6 with the original carb and the same problem. ran rich , stalled easy, no power. i tried to tune it, lean it out, adj. the...
i have a set of the ebay seat covers and a set of originals low-back seats for a 74 i was going to put them on. i decided i would rather have a...
i used the smittybilt standard highback seats from collinsbrosjeep, not the besttop trailmax seats. again the new seats are a tight fit but a...
all right guys, installed the seat this afternoon and they fit great. i had to make bolt hole adaptors for the passenger seat. i used the...
Seats Installed all right guys, installed the seat this afternoon and they fit great. i had to make bolt hole adaptors for the passenger...
I dont want to mislead anyone. i have not yet installed the smittybilt/outland standard highback seats yet. i did sit them on the seat brackets...
Good news. the smittybilt seats came today and although i have not bolted them in yet i placed them on my seat brackets and sat in them. there...
i took my old seats to two different upholsterers and both would not touch'em. something about the springs being inside the foam and all the rust...
hey guys, i just ordered some smittybilt standard high back seats for my 74 cj5. i know alot has been said on this topic but does anyone have...
this sounds like a great idea. do youo think i could cut a patch to the exact size and "weld it in from the backside with this stuff. on the...
hi guys, i think i want to repair some small rust holes on my floor panels in my 74 cj5. i dont have a welder, the skill to weld in a new...
Separate names with a comma.