Weird, some things are Intermediate and some are Early model stuff
I have a body shop that does rust repair and we use that product. Most body panel adhesives require bare metal. Be sure to get it everywhere you...
I use a cheater lens in my helmet and a light with a flexible arm that I can point to wherever I’m welding. Eastwood has a few lights with the...
I do rust repair for a living. You’ve definitely got some major stuff going on. To repair it right, it’s going to take someone with knowledge and...
Check with a good automotive paint store. I know there are some clear coats that are being used for preserving patina. (I own a body shop that...
An intermediate frame showed up for sale today in the classifieds
If you have a good automotive paint store near you they can match it and mix rattle cans for you.
I own a body shop and we use the 3M double tape for emblems and mouldings. You don’t need to scuff the paint. Be sure to clean the area first with...
As a body shop owner/tech, I would scuff wherever you’re going to paint. You can use a red scuff pad from an auto paint store or a scotchbrite...
I own a body shop that does a lot of rust repair. We almost never flange weld stuff bcuz it’s really difficult to seal it completely from rust. I...
My ‘75 owners manual shows a tach with the Jeep logo. I’m hoping I come across one someday...
Miller makes a welding halfmask that works well.
Classic made one for my ‘75 CJ6 that goes higher than their listed one but not quite as high as you need it. Mark at Classic told me that they...
As I mentioned, a good auto paint supplier should be able to mix that even if the code showed lead. My supplier had to mix for my ‘75 and he...
I’m a body shop owner/tech. Most paint shops should be able to mix that as a single stage paint as it doesn’t have a bunch of pearl or metallic in...
I own an automotive frame/body shop. We have a frame machine and with the correct pressure, etc. we usually do not use heat. Normally you use...
Anyone have a preference for stock wiper arms for a '75? I've seen Crown, Omix-Ada, Anco & Kentrol & was just wondering which ones are the best....
Thanks so much for all the info!
Thank you, I would appreciate that!
timgr, sorry for the confusion. After looking closer, I do have the crossmember. Is the drawbar the same 55-75? I would like to make my "6" as...
Separate names with a comma.