hello , i just bought a one piece bell housing to adapt the sbc to a T14 A! high impact .... that was the only company to offer this .. aa...
hello , i did mine ...was not so difficult ... but you must clamp the frame prior to weld ... [IMG] [IMG] Hope this help ... let...
Hello , thank's for the advice... so here's a call.... oye oye maybe there's a jeep guy on this forum who lives in Germany? It would...
have a compression check.. you will know if your ring are shot... my xj 4.0 with 242000 miles has the ring dead , but till plug fouling...but...
woahhh.... i'm an happy man.. is it a 11"bellhousing ...do you have the casting number... anyway great !!! i pm my email to both of you .....
thank's , i've found thre wright bellhousing on ebay for 50 $ but he ask 157 $ for the shipping (fed ex !) .....:( but i go once a year to...
hello , the jeep cherokee used in europe a 4cyl 2.1 td renault engine, a bit weak , but with a cooling up-grade and the new generation...
thank's .. still a long way to go ... but just found tha advance adapter that i needed on ebay(80$ instead of 300$), i'm missing the stock...
here's the link of part of the project... http://allroad.no-ip.com/jeep_hospital/pollo_loco/page_01.htm in pics 112.12 15 you see that every...
hello , i think the same as posimoto .... as my tub was also shot, i'd prefere to have a rigid frame and tub , like this i have no fear to...
i've boxed my frame on my 75 cj 6, it went pretty easy ... but he thing to watch out it's to tight strongly the frame before welding to...
well , i will give a try with the t14, if not i will have a reason to come to usa :P ,
a few month ago , i was searching a th350 , i've found one 1000$, he sais it was rebuilted... but i'm sure not the perfect way , plus the...
cause i can't find a segond hand one over here :twisted: i will have to by it from e-bay ... pretty scary for a tranny :P sonds good
thank's , it's strange , when you look into advance adpter catalog, they describe the t14 as the t150 as medium duty; when you open them...
Hello , i was ordering parts at 4wd , the technical guy told me that the t14a will be to weak for my engine (305 chevy tbi). i was afraid, so...
Hello everybody, when i bought my 75 cj6 , it had a soft top (best top) on it , but doors are one piece, i want to fit two piece soft doors,...
Thank's for youe help, you know what it's ... don't have enough money to make a bad buy.
well, mhmmhm...grrrr R) i will go crazy... 2.5 body lift , 4 inch suspension , 1inch longer schackles... will it be too much for 35 ,...
Yes , i know body lift are not that good, mine is home made ,new body fixation welded , i use stock screw and mount . i need it to pass my...
Separate names with a comma.