I have drilled out my knuckles to 3/4" but this was to accomodate an aftermarket drag link and tie rod kit that uses rod ends, not the stock...
Doesn't look like mine. Mine is just a plain metal arm.
I ordered a new hose from Aircraft Spruce. They have all sizes of vent tubing used on aircraft and you order it by the foot and diameter. They...
I appreciate all your thoughts. What exactly do you mean by a 2 holed knuckle. Is this some kind of after market entity or used on another Jeep....
I am not sure a dropped pitman would make much difference. In fact it may cause the drag link to hit the springs.
Here are the fotos. Basically the angle of the drag link forward is too much so the joint at the knuckle is maxxed out or maybe even forced a little.
My 1967 CJ5 didn't have hazard or back up lights and some factory manuals show the harness with and others without a hazard switch.
Thanks. I am at work now but I will try to attach some pictures later when I get home. Basically I am talking about the angle the drag link makes...
I have nearly just completed a 2 year restoration project with my son (to teach him the basics of a car) and redid the wiring. I can tell you it...
I know there has been a lot of discussion in the past about the Saginaw conversion for the CJ5 Dauntless V6 in the past threads but I have a more...
Separate names with a comma.