I often read on this forum but don't contribute. I guess what you have to know about me, I believe in word of mouth and strongly consider others...
I have a 1979 CJ5 that has a bad master cylinder. When I call the parts store for a replacement they told me that they had the parts for the power...
Will do. Thanks
I preformed a compression test on the cylinders today. All the cylinders showed up at 140 psi but cylinder 1. It had a dry compression of 100 psi...
If teh book says 55 and most go to about 80 ill go to 70. Thanks to all.
Thank you.
I took the flasher out and tested it for power, and there was none. I cant spot any immediate breaks. Also noteworthy, the hazard lights work...
They are 1/2 inch. So consensus is 80?chainsawguy
I have the hanes manual, but i can not find what the torque specs are for the nuts on the u bolts around the axles. Can someone help?
Thank you both. ill do that and tell you all what it was.
I have been chasing down all the wiring on a 79 cj5. I have it all narrowed down, but the turn signals dont blink. The lights work. Could it be...
There was a cheap tiger top available, that is why I asked. I passed it up, however. Thanks for the reply.
Does OEM hardware work for Bestop Tigertop? Are the bars the same or different? I have 1 79 cj5
I wasnt sure about the specifics however i was sure it worked. What is it worth?
Yes thanks
I disassembled my battery tray and the bracing bars below the tray. Now, the bars all look the same. Does anyone have any pictures of the battery...
Hey thanks. I will go cheaper then.
I know bigger is better, but is it worth the cash to get the 2/0 battery cable vs 2 gauge? Thanks
So you sold one in good shape, repaired for $250?
Re: Grizzy One Hard top Price Question!!!! The top should be for a 1976-1989 CJ? Anyway, I have the same jeep and year model as the seller. It...
Separate names with a comma.