Regrettably sold it 20 years ago. My wife has never asked me to sell anything since. Which is probably why I have $10,000 worth of spare parts...
Has anyone on here transplanted an early 80’s 4.3L Diesel engine into their CJ? I have a 225 Oddfire in mine right now, have 2 spare 225’s and a...
What PTO driven winch would be period correct for my ‘67 CJ5?
With my ADD, I don’t get along with electrical. Lol
Only my RH brake light and turn signal work, could this switch be the problem? I get nothing on the left.
Thanks! Probably just get a reman. Appreciate all your help!
I have a '67 CJ5 with an oddfire V6. Has anyone ever rebuilt them with new weights, springs and pins? The pivot pins for the weights are worn...
Does anybody have a list of part numbers for adding a pertronix setup to a Delco distributor including a pertronix flamethrower coil?
Thanks! Sounds like Dana 30 it is! I appreciate all the input!
I have a line on a front axle Dana 44 from a Scout II. I am debating weather this would be a good swap in for my '67 CJ5. Is there a lot of...
I have a '67 CJ5 and I have completed the disk brake conversion on the front. It has been torn apart for two years. One year of that is because...
I recently purchased a Trac-Loc for my offset Dana 44 I am building and will be putting in my '67 CJ5. I have seen on several occasions people...
Thank you for the info!
What year jeep hanging pedals are best/easiest for an early CJ pedal conversion? I've seen on eBay one set that has one pedal on each side of the...
Thanks for all the good info! It is a pure stocker with the Dauntless V6. Will probably take my time rebuilding the flanged axle and install...
I know... I'm being lazy. I just don't want to take off the rear diff cover. I crawled under my stock '67 CJ5 to look for the tag on the rear...
I bought this overdrive and want to go through it, but can't seem to separate it. What am I missing? It won't budge. Any help would be greatly...
Thank you all for the valuable information!
I checked with Herm and he said he doesn't have a kit that works with the two hole knuckle.
First the facts, (1967 CJ5 stock axles with exception of the knuckle stud and disk brake conversion, Dauntless V6, T86 trans) I recently purchased...
Separate names with a comma.