1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ebrake bolt

Discussion in 'Early CJ5 and CJ6 Tech' started by piffey263, Jan 1, 2012.

  1. Jan 1, 2012
    piffey263

    piffey263 Active Member

    Medford, OR
    Joined:
    Oct 16, 2008
    Messages:
    1,214
    Is the ebrake bolt that is under the driveshaft that is on the ebrake drum left or right hand thread and is there a trick to get it off?

    I got the right size socket and a breaker bar and nothing I'm worried I'm going to brake the transmission
     
    piffey263, Jan 1, 2012
    #1
  2. Jan 1, 2012
    dpjohnson

    dpjohnson Member

    Minnesota
    Joined:
    May 17, 2010
    Messages:
    26
    If your talking about the nut that holds the rear output yolk on it is torqued to 120 ft/lbs when assembled. I have used a large pipe wrench to hold the yolk and a breaker bar with socket on the nut. A impact gun works a lot better though.
     
    dpjohnson, Jan 1, 2012
    #2
  3. Jan 1, 2012
    dpjohnson

    dpjohnson Member

    Minnesota
    Joined:
    May 17, 2010
    Messages:
    26
    Oh, and the nut is RH thread.
     
    dpjohnson, Jan 1, 2012
    #3
  4. Jan 1, 2012
    piffey263

    piffey263 Active Member

    Medford, OR
    Joined:
    Oct 16, 2008
    Messages:
    1,214
    Okay thank you I guess I will fix compressor I didn't see anything to hold the yoke,(emergency brake is all mangled I honestly don't know how the drum was torn off)
     
    piffey263, Jan 1, 2012
    #4
  5. Jan 1, 2012
    piffey263

    piffey263 Active Member

    Medford, OR
    Joined:
    Oct 16, 2008
    Messages:
    1,214
    I misread your post I will use a pipe wrench to hold it that's a good idea
     
    piffey263, Jan 1, 2012
    #5
New Posts