1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Broke something.

Discussion in 'Early CJ5 and CJ6 Tech' started by scott milliner, Jun 4, 2011.

  1. Jun 4, 2011
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    scott milliner, Jun 4, 2011
    #1
  2. Jun 4, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    broken tooth/teeth
    time to drop the pan
     
    jpflat2a, Jun 4, 2011
    #2
  3. Jun 6, 2011
    Bob Greenslade

    Bob Greenslade Member

    Roseville CA
    Joined:
    Sep 15, 2008
    Messages:
    232
    Might as well just pull the case, it's time for a rebuild. Parts are easy enough to find.
     
    Bob Greenslade, Jun 6, 2011
    #3
  4. Jun 6, 2011
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,515
    Almost sounds like an output shaft err something. My case locked up when I shaved teeth off. Any way you shake it, it'll have to come out. Luck to you, sir.
     
    wheelie, Jun 6, 2011
    #4
  5. Jun 6, 2011
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,516
    vote missing tooth also, could be intermediate gear, not that its makes too big a difference. bummer!
     
    duffer, Jun 6, 2011
    #5
  6. Jun 7, 2011
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    Your right. It was the intermediate gear. It's missing two teeth. Easy fix. Now I just need to find one.
     
    scott milliner, Jun 7, 2011
    #6
  7. Jun 7, 2011
    Mike S

    Mike S Sponsor

    Cameron Park Ca.
    Joined:
    Oct 6, 2009
    Messages:
    811
    Mike S, Jun 7, 2011
    #7
  8. Jun 7, 2011
    AKCJ

    AKCJ Active Member

    Fairbanks, Alaska
    Joined:
    Aug 12, 2003
    Messages:
    1,035
    got my tcase parts from herm, gears and all
     
    AKCJ, Jun 7, 2011
    #8
  9. Jun 7, 2011
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,515
    2 teeth in a row or were they spaced apart? When mine spat teeth, the JEEP would move a few feet then, stop like it ran into a tree. I was, however, missing more than 2 teeth. It was more like 4 or 5 in a row. Anyhow, glad you found the problem.
     
    wheelie, Jun 7, 2011
    #9
  10. Jun 8, 2011
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    Close to me?:rofl:
     
    scott milliner, Jun 8, 2011
    #10
  11. Jun 8, 2011
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Hey, Oregon is near Seattle, isn't it? Certainly closer to you than to me. :coffee: :)
     
    timgr, Jun 8, 2011
    #11
  12. Jun 8, 2011
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,516
    Scott, maybe you should give the replacement the cryogenic treatment. Next time mine comes apart, I'm going to give it a try.
     
    duffer, Jun 8, 2011
    #12
  13. Jun 8, 2011
    Mike S

    Mike S Sponsor

    Cameron Park Ca.
    Joined:
    Oct 6, 2009
    Messages:
    811
    Portland is a lot closer to you than it is to me.

    It is all relative.........
     
    Mike S, Jun 8, 2011
    #13
  14. Jun 8, 2011
    jeep2003

    jeep2003 Well-Known Member

    Upstate NY
    Joined:
    May 30, 2006
    Messages:
    1,933
    i might have what you need i pmd you
     
    Last edited: Jun 8, 2011
    jeep2003, Jun 8, 2011
    #14
New Posts