1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Locking hub question

Discussion in 'Early CJ5 and CJ6 Tech' started by wlkrpines, Mar 11, 2011.

  1. Mar 11, 2011
    wlkrpines

    wlkrpines Member

    FERNDALE, MT
    Joined:
    Mar 22, 2008
    Messages:
    61
    I broke a 27 spline 5 bolt plastic Warn hub. Instead of changing to the 6 bolt wheel hub and premium Warn hubs right now, I opted for the Mile Marker 470 to keep the Jeep going with all the snow we have had lately.

    Question:

    The snap ring that holds the inside part of the Warn hub on the axle shaft will not go back on with the Mile Markers. The groove is not exposed. There is some end play in the shaft but not enough to get the snap ring on.

    Am I missing something? Can they be run without the snap ring or will that do damage?

    Thanks for the help
     
    wlkrpines, Mar 11, 2011
    #1
  2. Mar 11, 2011
    wlkrpines

    wlkrpines Member

    FERNDALE, MT
    Joined:
    Mar 22, 2008
    Messages:
    61
    Sorry for the bother....:oops:

    Got them on, it was just a very tight fit.
     
    wlkrpines, Mar 11, 2011
    #2
New Posts