Need a Hydraulic Clutch/slave cylinder T15 3 speed

Hello folks any suggestions for a replacement Hydraulic Clutch and Slave cylinder for a t-18 3 speed on a 258... the hooker headers that i installed do not allow clearance for the manual clutch linkage.

Will the later model CJ7 hydraulic master and slave work and have sufficient throw on the throwout arm?

Application is a 1973 CJ5

Thank you for all and any suggestions.

 

Re: Need a Hydraulic Clutch/slave cylinder T18 3 speed

I believe mine came from an early 80's CJ7. Advance Auto part number 900021 for the slave and 800012 for the master.

It bolted right up to my bellhousing with no mods. I have a 360 with OEM exhaust manifold.

 

Re: Need a Hydraulic Clutch/slave cylinder T18 3 speed

parts mike in california sells the master, slave and line as a kit.

www.partsmikeparts.com

 

Re: Need a Hydraulic Clutch/slave cylinder T18 3 speed

you can get the hydraulic set up on ebay pretty cheap

 

Thanks for all the help much appreciated and I corrected the Transmission type to a T15

 

Re: Need a Hydraulic Clutch/slave cylinder T18 3 speed

Just visit the following URL for everything you might need to know and appropriate parts to procure, including bell-housing ring frame unit for slave cylinder mounting, etc !

Gunner

Direct Hyper-Link to Novaks description of Jeep Slave, Master and mounting information. Also rebuild kit data!:

http://www.novak-adapt.com/catalog/kit_hcra.htm


http://www.novak-adapt.com/knowledge/clutches_etc.htm