1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

51 M38 Spare Tire

Discussion in 'Flat Fender Tech' started by F150Boss86, Apr 6, 2009.

  1. Apr 6, 2009
    F150Boss86

    F150Boss86 New Member

    Joined:
    May 28, 2008
    Messages:
    36
    I just bought a spare tire bracket for my m38 off of ebay. My question is where should it be located? I have a M38 Owners manual and the picture shows the spare tire on the back, but the manual is also dated 1956. So for a 51 should it be on the tailgate passenger side or the rear passenger side panel? Thanks guys
     
  2. Apr 6, 2009
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    on the tailgate, you should see supports on the passenger side of your tailgate.
     
  3. Apr 6, 2009
    F150Boss86

    F150Boss86 New Member

    Joined:
    May 28, 2008
    Messages:
    36
    Thats what confused me, I have supports on the driver's side for the gas tank, but nothing on the passenger side...
     
  4. Apr 6, 2009
    F150Boss86

    F150Boss86 New Member

    Joined:
    May 28, 2008
    Messages:
    36
    Would a two pieces of angle iron on each side be enough? Does someone have apictures by anychance of where and how they are mounted? Pictures are a 1000 words..
     
  5. Apr 6, 2009
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    On the drivers side would be your fuel can. Send me pics of your tailgate. I will look to see if I have pics of mine.
     
  6. Apr 6, 2009
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    Ok in this pic you can see the 4 bolts that would hold the spare tire carrier on if I had it mounted yet

    [​IMG]
     
  7. Apr 6, 2009
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
  8. Apr 6, 2009
    F150Boss86

    F150Boss86 New Member

    Joined:
    May 28, 2008
    Messages:
    36
    The pics defiantly help show where it needs to mount. Is the reinforcement the same as the jerry can holder?
     
    Last edited: Apr 6, 2009
  9. Apr 6, 2009
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    Yes I think they are about the same. If you ask wes on the willysmjeep sites he will have a good pic
     
New Posts