1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Is this ridiculously expensive?

Discussion in 'Early CJ5 and CJ6 Tech' started by manden68, Jul 19, 2004.

  1. Jul 19, 2004
    manden68

    manden68 Member

    O Fries Country
    Joined:
    Jul 16, 2003
    Messages:
    214
  2. Jul 19, 2004
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    Yes.

    I bought my 73 drum brake D30 for $75. Buddy of mine then bought his 78 CJ5 which had the disc D30. Since he was putting a D44 in the front I nabbed that D30. I bought all new rotors, ball joints, seals, calipers, hoses, etc.. and still have less than $300 in it including the price of the axle.
     
  3. Jul 19, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    it is much cheaper for you to do it.

    $50 for each rotor.
    $30 for each caliper without core
    $12 for each rubber hose
    $20-50 for a set of chevy caliper brackets

    possibly might need a new master cylinder because some swaps are more trouble than others, depends on your karma.

    Defiantely under the price they are chargin
     
  4. Jul 19, 2004
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
  5. Jul 20, 2004
    manden68

    manden68 Member

    O Fries Country
    Joined:
    Jul 16, 2003
    Messages:
    214
    That's what I figured. Near next to a grand! I could buy my new tires and still have some left over for that used W 8724-50.
     
  6. Jul 20, 2004
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    for that price, it better put itself on, and change it's own pads!
     
  7. Jul 22, 2004
    Jeepnut67

    Jeepnut67 New Member

    Mammoth, AZ
    Joined:
    Aug 25, 2003
    Messages:
    49
    I found a 79 CJ in the boneyard, took the brackets, went to napa bought new calipers and brake lines and to a brake parts place and bought brand new rotors and assembled it myself. I hve $800 in the front axle from hub to hub, but that includes an ARB, and brand new Premum Warn Lockouts... means I spent only $200 or so to go to disk as far as the front axle goes.
     
New Posts