Terminal connectors

Can someone point me in the direction of where to get terminal connectors for my back up lights? My switch appears to work but isn't wired up. I need to find the connectors that connect to the terminals on the switch.

Thanks in advance!

SwampRatt

 

Do you need the terminals themselves or the plastic part or both? I believe the terminals are a packard 56.

 

I just used universal terminal connectors, they were a little loose so I just crimped the connector a little with pliers to get a tight fit.

 

I need the wire side. The switch has the terminals, I need to connect to them. So I need the connectors to solder to the end of the wires to hook to the switch.

Packard 56?

 

Yes, I used terminal connectors, probably more correct to say female terminal connectors or possibly female spade connectors

 

This place has a list of vendors for packard 56 terminals:
http://www.rowand.net/Shop/Tech/AutomotiveElectricalConnectors.htm

This place has them for 14 cents each (don't know what the minimum is):
http://www.keefeperformance.com/packard56.html

Here is another one:
http://terminalsupply.net/Store/Default.aspx?CAT=DEL010030&PCAT=12729#Categories

I am sure there are more. Can't remember who I bought mine through but I bought a bag of 50-100 since almost all of the terminals on a jeep are the same

 

Ah, thanks. Looks like what I've called a spade connector or some such.

 

These are basically the same except they have a clip on them so they can be installed in plastic connectors

 

The plastic connector is available - it's been posted here before. I don['t recall the details, but if you search you'll probably find something about it. Try 'backup light connector' or maybe 'brake light connector' in the ECJ5 forum ... I think it's the same or very similar to the Delco alternator plug? Something like that.