1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Brake Switch - Electrical

Discussion in 'Early CJ5 and CJ6 Tech' started by Don X, Jul 31, 2008.

  1. Jul 31, 2008
    Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    San Diego,...
    Joined:
    Mar 30, 2007
    Messages:
    3,383
    I've got a bad a wire connector that attachs to the brake switch on my MC. It's a bullet type connector that's soft metallic (copper?). What's the proper name for that type of "thingy"? and is that a generic fitting that a FLAPS should carry or do I need to find an automotive electric supply house? Thanks.
     
    Don X, Jul 31, 2008
    #1
  2. Jul 31, 2008
    panzer

    panzer Super Mod Staff Member

    Columbus, OH
    Joined:
    Dec 9, 2003
    Messages:
    1,245
    FLAPS should have them.

    [​IMG]
     
    panzer, Jul 31, 2008
    #2
  3. Jul 31, 2008
    gte636p

    gte636p Member

    smyrna, Ga
    Joined:
    Sep 23, 2002
    Messages:
    492
    I "think" this is the right connector, napa part number LIT 95306:

    http://partimages2.genpt.com/partimages/270827.jpg

    If it looks more like the reverse switch the number is EIC ART 120 (Eichlen AC clutch switch for a GM car just in case I remembered the incorrect part number).
     
    gte636p, Jul 31, 2008
    #3
  4. Jul 31, 2008
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    A pair of bullet connectors and some GOOD shrink-wrap have been holding up well in my Jeep. Going on 4 years now with no issues.
     
    w3srl, Jul 31, 2008
    #4
  5. Aug 1, 2008
    jeeper50

    jeeper50 jeeps 'till I die

    Spanish Fort. AL
    Joined:
    Dec 20, 2007
    Messages:
    844
    FLAPS does have them in the help section, I bought a pkg of them last year.
     
    jeeper50, Aug 1, 2008
    #5
New Posts