1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch Installation CJ5 Fhead t90

Discussion in 'Early CJ5 and CJ6 Tech' started by whiterook, Mar 14, 2008.

  1. Mar 14, 2008
    whiterook

    whiterook New Member

    Joined:
    Jul 5, 2007
    Messages:
    8
    guys without a doubt this question has come up before but I've had no luck searching. I've just installed my engine but now wonder if I installed the clutch with the correct side towards the flywheel. Would someone be so kind as to email me a picture of the correct installation to gordonclanhelmets@roadrunner.com Any help would be greatly appreciated. the pictures in the manuals are no help at all. Thanks Fred
     
  2. Mar 14, 2008
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    from the Jeep FSM
    typically, a sticker may be attached to the disc, indiacting direction from the mfr.
     
  3. Mar 15, 2008
    whiterook

    whiterook New Member

    Joined:
    Jul 5, 2007
    Messages:
    8
    that's fine if it's new. I'm replacing the one that was already installed but it's a time since removal and it's not got a tag or stamped into it. Does the flush side go towards the flywheel and the section that sticks out some towards the rear???
     
  4. Mar 15, 2008
    Ab

    Ab Member

    The Netherlands
    Joined:
    Mar 14, 2006
    Messages:
    51
    Did this last week. My disk could not be fitted the other way around, it just won't fit, there's not enough space on the flywheel.
    Flat side to the flywheel, green springs are to the rear off the vehicle....
     
  5. Mar 15, 2008
    whiterook

    whiterook New Member

    Joined:
    Jul 5, 2007
    Messages:
    8
    Thank you. Fred/whiterook
     
  6. Mar 16, 2008
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525

    new, used, condition doesn't matter if you read what I posted from the FSM
     
New Posts