Power Steering Pump Pulley

I have a new pump, hoses, and box coming. I have a new pitman arm and steering shaft coming. Where can I find a power steering pump pulley for the pump. The salesman says a pulley off of a 1976 CJ5 from a 304 will fit the pump. I tried the local parts houses, they don't even have a listing for this application.

Thanks for the help in advance.
JC...

 

i was never able to find a new ps pulley for my jeep. It seems that no one wants to make replacment pulleys. I ended up having to straighten the pulley I had. Probably any pulley off of a gm with the same style pump would work.
-Dante

 

I tried to find one also. No luck... I got one from a wrangler that I found scrapped.

 

Any GM style pump and pully should fit. That is what I used.

 

I saved this link from another jeep site . Someone was looking for one and with the help of their local auto store they came up with a Dorman product pulley .
Cannot verify it myself , but the guy that posted it said it matched up .

Here is a link that they had posted :
http://www.shop.com/op/~Dorman_Power_Steering_Pulley_1993_76_General_Motors_Cars_Trucks,_2_GROOVE_(various_engines)-prod-26353215-34930991?sourceid=298

 

I will let you know in a couple of weeks install the power steeirng.

Thanks

JC...

 

I will let you know in a couple of weeks when I install the power steering.

Thanks

JC...

 

I got my P/S pump from a 1980 Jeep Wagoneer. Any pump that bolts on a 360 will bolt right up on your 304. You might have to settle for a dual groove pulley and leave one empty, because the second groove ran the air pump.