1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Timing

Discussion in 'Early CJ5 and CJ6 Tech' started by T Todd, Feb 20, 2007.

  1. T Todd

    T Todd Mostly Confused

    Hey guys I finally got my distributor and module back from Pertronix for the 134. It started right up this time!! When I hooked up the timing light I'm about a quarter inch off the timing mark and out of adjustment. Can I just pull the dist and move the body one tooth counter clockwise to get in the adjustment range?
     
    T Todd, Feb 20, 2007
    #1
  2. sparky

    sparky Sandgroper Staff Member Founder

    I didn't think the F-head had multiple "teeth" I thought it was just a slot when I've worked on them?????

    I thought you just rotated the distributor to time it.
     
    sparky, Feb 20, 2007
    #2
  3. T Todd

    T Todd Mostly Confused

    Well now that you mention it there is no gear on the dist it's on the pump. Maybe I'll just have to lengthen the adjustment slot on the mount?
     
    T Todd, Feb 20, 2007
    #3
  4. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    There should be 2 slots.......
     
    blevisay, Feb 20, 2007
    #4
  5. sparky

    sparky Sandgroper Staff Member Founder

    Like this? +
     
    sparky, Feb 20, 2007
    #5
  6. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    There should be one over and one under........I need a pic dont I ?
     
    blevisay, Feb 20, 2007
    #6
  7. sparky

    sparky Sandgroper Staff Member Founder

    Yup.
     
    sparky, Feb 20, 2007
    #7
  8. T Todd

    T Todd Mostly Confused

    I don't remember if the block side is slotted or not, I'll check that . Did a search and I'm prolly going to have to reset the pump if I can't find a little more adjustment.
     
    T Todd, Feb 20, 2007
    #8
  9. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    I tried to get the camer in there........I cant........going to plan b.

    I understand the problem cause I had the same thing even with the 2 slots.....The wire on the dist is allmost too short.
     
    blevisay, Feb 20, 2007
    #9
  10. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    It should be........at least I made sense to you!
     
    blevisay, Feb 20, 2007
    #10
  11. T Todd

    T Todd Mostly Confused

    Thanks guys. I filed -both- slots in the plate and got all I needed. :) Didn't want to move the pump in case I ever have to go back to points.
     
    T Todd, Feb 20, 2007
    #11
  12. sparky

    sparky Sandgroper Staff Member Founder

    Ohh!!!! I know what you did now. 8)
     
    sparky, Feb 20, 2007
    #12
  13. 1960willyscj5

    1960willyscj5 Well-Known Member

    I'm not sure I do, but until I have to do it, I won't worry about it, and you all will get a message asking for help and pictures.
    You know - "If It Ain't Broke, Don't Fix It!" :coffee: IIAB,DFI!:beer:
     
    1960willyscj5, Feb 20, 2007
    #13