1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Oil filter question

Discussion in 'Early CJ5 and CJ6 Tech' started by spize909, Jan 13, 2007.

  1. Jan 13, 2007
    spize909

    spize909 '65 Tux........SOLD

    Upland CA
    Joined:
    Feb 26, 2006
    Messages:
    170
    Oil filter question, pics added

    When I picked up my Jeep there were a couple of old oil filters, new in the box.
    They are Fram C-104's
    Does anyone know if they go to any kind of Jeep application.
    They are canister filters and I figured they were for the original motor.
     
    Last edited: Feb 11, 2007
    spize909, Jan 13, 2007
    #1
  2. Jan 14, 2007
    Debruins

    Debruins Low on $$ High on life

    Mass. summer in ME
    Joined:
    Jun 16, 2006
    Messages:
    119
    those look similar to what a :hurrican: would have, but not exact. Not sure if you have a V6.


    btw you can get rid of the gasket it is not needed for the F134 application


    correction

    I would listen to what everyone else is saying, the gasket is used I guess. The guy at Napa told me it would not fit and i trusted him and threw it out.
     
    Debruins, Jan 14, 2007
    #2
  3. Jan 14, 2007
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,128
    ?!?

    Don't you replace the gasket in the cover when you change filters?

    I thought V6s came with spin-on filters right from the get-go-

    That filter in the pic might be for a M38A1, they used a different filter & housing than the civvy versions.

    H.
     
    Howard Eisenhauer, Jan 14, 2007
    #3
  4. Jan 15, 2007
    dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    Groton, CT
    Joined:
    Nov 3, 2003
    Messages:
    1,000,081
    according to my jeep industrial engine service manual for the dauntless, it was a screw on oilfilter PN# 5577981
     
    dauntless_powered, Jan 15, 2007
    #4
  5. Jan 15, 2007
    dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    Groton, CT
    Joined:
    Nov 3, 2003
    Messages:
    1,000,081
    i know if you cross refernce that part # i posted with fram...fram says it should be a ph11

    thats about all i know at this point, guess i wasnt much help
     
    dauntless_powered, Jan 15, 2007
    #5
  6. Jan 15, 2007
    etu

    etu Member

    Joined:
    Aug 4, 2005
    Messages:
    68
    I'll check later but pretty sure the 104 is the canister filter for the F134. The gasket goes in the top of the canister.
     
    etu, Jan 15, 2007
    #6
  7. Jan 15, 2007
    Jack Frost

    Jack Frost Member

    Mineral, VA
    Joined:
    Nov 28, 2006
    Messages:
    114
    It is, at least on my F-134.
     
    Jack Frost, Jan 15, 2007
    #7
  8. Jan 15, 2007
    spize909

    spize909 '65 Tux........SOLD

    Upland CA
    Joined:
    Feb 26, 2006
    Messages:
    170
    My Dauntless uses the PH-11.
    They (the c-104 filters)were with some misc. stuff that I got when I picked up the Jeep.
    I was just curious about their origin.
    Free to a good home if anyone wants them.
     
    spize909, Jan 15, 2007
    #8
New Posts