1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

which U-bolts?

Discussion in 'Early CJ5 and CJ6 Tech' started by evanjm, Nov 22, 2006.

  1. Nov 22, 2006
    evanjm

    evanjm Yeah, it's got an F-head.

    Leesburg, VA
    Joined:
    Sep 13, 2006
    Messages:
    408
    I've got a 57 CJ5 badly in need of some new u-bolts. What I'm trying to figure out is what size do I need?

    2-9/16" or 3-1/4"? Or are the smaller ones the front and the 3-1/4 the rear?

    Thanks,
    Evan
     
    evanjm, Nov 22, 2006
    #1
  2. Nov 22, 2006
    tommy b

    tommy b Member

    Golden, Colorado
    Joined:
    Oct 23, 2005
    Messages:
    341
    I believe the front takes 3 small and one large. The large one goes over the end of the punkin. Take a look at the last picture in the tech article, "Drilled 11" Drum Brake" article in the tech section. (Click on the logo at the top of this page to access the tech articles). I'm not sure about the rears. I can check for you when the sun comes up.

    tommy b
     
    tommy b, Nov 22, 2006
    #2
  3. Nov 22, 2006
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822
    Tommy B is right. Front takes 3 small, one large. Large one for the pumpkin side of the pass. front. Also, if you're planning on "upgrading" by going to the next larger diameter bolt, DON'T! That is unless you're planning on also upgrading the spring plates. Otherwise, you'll need to drill out the originals, and that leaves very little metal on the edges of the holes.
     
    Old Bill, Nov 22, 2006
    #3
  4. Nov 22, 2006
    Grandpot

    Grandpot Old Narc

    South Carolina
    Joined:
    Jul 4, 2006
    Messages:
    57
    Grandpot, Nov 22, 2006
    #4
New Posts