sheet metal for 75 cj5

ok im just got my cj5 and im trying to fix the rust does anyone know if there is a good site where i can find all the parts at without buying a tub. cause i really dont want to fabricate them

 

Pick a source close to where you live if you can. Shipping could be expensive.

Also http://www.classicent.com/jeep.htm

 

If you are just getting panels (I bought rocker panels), www.4wd.com/vintage , or quadratec. Each rocker panel was only $17 and they seem to be pretty good quality. They have quarter panels, floor pans, you name it.

 

thanks but the part i need is inbetween the hood and windsheild it is like a u shape goes across the whole thing can't find it anywhere guess ill have to fabricate it.

 

Look for replacement cowl...I believe that is what you are looking for.

Here's one listing.

http://www.thejeep.com/shop/BODY+PA...+CJ5,+CJ7+%2526+CJ8+STEEL+REPLACEMENT+PANELS/

 

check www.vintagejeepparts.com

I saw some cowls in thier catalog but cant remember where i put the catalog.

 

Omix-Ada part #5758706 at www.4wd.com $139.99 + $22 shipping. Our club gets an additional 10% off, maybe yours does, too. Its listed as a '76+, don't know what differences there might be but its gotta be easier to trim this one than create one.

 

You should be able to find a tub with a good cowl and harvest the metal for your repairs. The cowl does not typically rust out - usually it's all that's left on a really rusty Jeep. Where are you located?

 

i cant get a tub the rust isnt that bad its just that one part plus im working with $2,000.
a cowl guys is like a hood scoop this is like right inbetween the hood and the windshield,its only about a foot wide

 

Post your location and we might be able to help you.

<edit> Nope, that's the cowl.