1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

V6 ground cable

Discussion in 'Early CJ5 and CJ6 Tech' started by Bob, Sep 14, 2006.

  1. Sep 14, 2006
    Bob

    Bob Member

    Northern California
    Joined:
    Sep 23, 2002
    Messages:
    441
    Where did the ground cable from the battery originally go on V6 Jeeps? Right now, mine goes from the battery to the last bolt on the passenger side of the intake manifold (closest to the firewall). Is this ok?
     
  2. Sep 14, 2006
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Ok, yes. I'd move it to a larger bolt into the block. Mine actually goes to the lower alternater mounting bolt..
     
  3. Sep 14, 2006
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Mine also!!
     
  4. Sep 14, 2006
    mike starck

    mike starck Member

    salem,oregon
    Joined:
    Jun 22, 2006
    Messages:
    762
    yes, lower alt. bolt on mine as well.'69 cj-5 w/ dauntless
     
  5. Sep 14, 2006
    Jeep475370

    Jeep475370 New Member

    Hickory NC
    Joined:
    Aug 9, 2006
    Messages:
    29
    Intake bolt here as well!!
     
  6. Sep 14, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Won't hurt to run a cable with a "pigtail" as well, to the fender. You also need a ground strap from the block to the frame.
     
  7. Sep 15, 2006
    Bob

    Bob Member

    Northern California
    Joined:
    Sep 23, 2002
    Messages:
    441
    Thanks for the replies. I was just putting the intake back on and was wondering if I should move the ground cable to a better spot than the intake bolt. I'll have to take a closer look at the lower alternator bolt. Also, it still has the factory ground cable from the block to the frame.
     
New Posts