1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Shifter boot

Discussion in 'Early CJ5 and CJ6 Tech' started by Project71-5, Sep 9, 2006.

  1. Sep 9, 2006
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    Does anyone have a good source for a shift boot for the T-14? I keep buying this kind, but after a year or so they seem to split and fall apart.
    [​IMG]

    For the twin stick I plan on buying this, I just hope it doesn't interfere with my overdrive lever.
    [​IMG]
     
    Project71-5, Sep 9, 2006
    #1
  2. Sep 9, 2006
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    I tore several of those, too.
    I got this one at Auto Zone, been in there for 4 years or so....
    Ignore the dirt :oops:
     
    Patrick, Sep 9, 2006
    #2
  3. Sep 9, 2006
    60CJ6

    60CJ6 BFH Guy

    Joined:
    May 30, 2005
    Messages:
    59
    Dirt is good Patrick, means your using your jeep instead of looking at it rust in the driveway:)
     
    60CJ6, Sep 9, 2006
    #3
  4. Sep 9, 2006
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    I used this gear shift boot:[​IMG]
    its a Mr Gasket #1651
     
    Last edited: Jun 30, 2007
    Mcruff, Sep 9, 2006
    #4
  5. Sep 10, 2006
    PatchyCJ5

    PatchyCJ5 Toledo Steel

    Deltona, Florida
    Joined:
    Jun 25, 2006
    Messages:
    111
    Hey Mcruff,

    Where can i get this "mr Gasket #1651" ? How long has it lasted you? I was gonna buy the one that project 71 has been buyin, but glad I didnt now that I read this post. thanks!!

    Jairo :beer:
    http://www.geocities.com/jeepjamboree1988
     
    PatchyCJ5, Sep 10, 2006
    #5
  6. Sep 10, 2006
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    You can get them at Summit for around $18, I bought mine from a guy on ebay for about $8 plus shipping. The summit part # is mrg-1651. It has been in my jeep for about a year and a half. It fits better than any shift boot I have seen for the early jeeps. You can also get them at some advance autos.
     
    Mcruff, Sep 10, 2006
    #6
  7. Sep 10, 2006
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    Thanks guys!

    I think I'll be ordering the Mr. gasket boot, its just what I've been looking for 8)
     
    Project71-5, Sep 10, 2006
    #7
  8. Sep 13, 2006
    PatchyCJ5

    PatchyCJ5 Toledo Steel

    Deltona, Florida
    Joined:
    Jun 25, 2006
    Messages:
    111
    me too thanks!
     
    PatchyCJ5, Sep 13, 2006
    #8
  9. Sep 13, 2006
    karlvin08

    karlvin08 I R SMRT

    Clarksville, TN
    Joined:
    Aug 30, 2006
    Messages:
    81
    I run what appears to be the same one as patrick, I believe I got it at advance auto but I could be wrong. It has been on there for a little over three years and just split a couple months ago, it is a little low on the priority list right now but i will be replacing it with the mr gasket or similar one eventually. For now a littel duct tape will do.
     
    karlvin08, Sep 13, 2006
    #9
  10. Sep 13, 2006
    solomon

    solomon Baby Jeep Junkie

    South MS
    Joined:
    Jul 19, 2006
    Messages:
    255
    How about you give me your address and I'll send you one.
     
    solomon, Sep 13, 2006
    #10
  11. Sep 15, 2006
    PatchyCJ5

    PatchyCJ5 Toledo Steel

    Deltona, Florida
    Joined:
    Jun 25, 2006
    Messages:
    111
    Do you sell them solomon?
     
    PatchyCJ5, Sep 15, 2006
    #11
New Posts