Tire Carrier

I about ripped the whole side of my jeep off this hunting season with the side tire carrier. I know that cross enterprise makes a good one but it is a little high for me right now.I run 31 inch tires and most of the wheeling is mud and ruts on logging roads(pup wood roads is what we call them in Alabama) Has anyone had any experience with the tire carrier from 4wd Hardware ? It looks about what I am looking for and is priced about right. Thanks


Matt Griffith
60 CJ 3B

 

Anyone home?

 

I saw some nice flattie carriers but can't remember were.........it's killin me. Maybe 4WD. You need to bolt the gate and probably put a plate on the inside. I don't carry one, I figure the engine will dump before a tire goes.

JC Whitney has this for a stock tire I suppose http://www.jcwhitney.com/autoparts/...ustom-0/p-2007140/N-250+111+600001481/c-10101

 

Before you spend the money on that you might want to do this.http://www.earlycj5.com/tech/body/quaggy/diy_tire_carrier.shtml
:v6:

 

Matt, I've seen the 4WD carrier. It's plenty beefy for stock sized tires up to a skinny 31 or 32. I think their catalog states 31" though. I plan to use one on my 3B. I will strip and paint it myself. The on I saw had a poor finish on it.

OT - Matt, what part of Alabama. I from L.A. and frequent Brewton, Andalusia, Enterprise.

 

Thanks for everyone answering back . I am originally from a small town outside of Gadsden (called Hokes Bluff) I now live in Sylacauga