low speed selector

Hello,
On my cj5 65' i only have one selector to select 4X4 or 2X4.
But the right axis is not used, I think than it is for low speed.
Do I have a solution to use it?
What is the standart mounting?
Please post your photos
regards
Bruno

 

the single stick has 4low, pull it back all the way (might be rusty). twin stick is another story (lever missing). do you have pics of YOUR setup?

 

with one photo, it's beter!

 

You are missing some parts. Here's a link to another thread with a picture.

http://www.earlycj5.com/forums/showthread.php?t=16371&highlight=dana+18+single+stick

 

Bruno,
You have the single stick d18 transfer case setup but you're missing some of the cam links that allow the single stick to move the two shift rails. You could try to find the missing parts or convert to a twin stick. I would recommend making the conversion because the cam setup for the single stick is not great and can cause problems. Herm has the parts to convert.
Note - making the conversion is more work, but for me it was worth it.
Jerry

 

Thank you for your help, I will try first to rebiuilt the system with one level,
when it's running I post a view!
If you have a photo of the parts assembled maybee it's helps.
For the double levels, do you have a photo?

 

Here ya go

 

actually i bought the parts from herm to twin stick mine. if you arent in a hurry, i can send you what i dont use that you need. but itll be a while tho. let me know.

 

take your time , it would be nice if you post your dobble stick mounting
bruno

 

Today I make and install the parts for the simple stick.
It's working!
thanks for your help
Bruno

 

Nice work glad you got er done Mike