WTB Np435/dana 20 (or 300?) Adapter

I’m thinking this is a long shot, but I could be convinced that I’m looking for a NP435 to Texas pattern Dana 20 adapter. Might also consider an adapter to a round Dana 300 adapter.

Thanks, all!

 

I was in your shoes - ended up getting new at Novak and it was totally worth it. BTW you want the Dana 300 and thats what I used with my 435 too. The 20 is not geared low enough.

 

Bumping this up. I don’t have the transmission in hand yet but my Bronco buddy arranged delivery to his place through a parts train. Should be getting it Monday but I’m still in no hurry to start the project.

 

I have a Dodge NP435 with the stock adapter on it for a NP208 using the same circle-6 pattern. PM me if interested.

 

Bump for a long shot.

 

Dana 20 can use Dana 18 gears with a Bronco Dana 20 intermediate gear to get 2.46 like the Dana 18 which is a far cry better than 2.02 of a Jeep Dana 20 and nearly the 2.62 of the D300. Since the Bronco gear is only $100 and Dana 18s are cheap all over the place this is definitely an option since it doesn't require buying a D300 and you can make it twin stick by using the Dana 18 shifter parts.