1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Emergency Flasher Wiring

Discussion in 'Early CJ5 and CJ6 Tech' started by Steve's 70-5, May 16, 2018.

Page 2 of 2
  1. Aug 1, 2018
    heavychevy

    heavychevy Sponsor

    Danielsville georgia
    Joined:
    Sep 7, 2008
    Messages:
    181
    Welcome rick sr to the forum
     
    heavychevy, Aug 1, 2018
    #21
  2. Aug 8, 2018
    gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    Houston, TX
    Joined:
    Feb 11, 2007
    Messages:
    93
    Does anyone have a source for the factory switch? The one on my 71 is inop.
     
    gibson-d@sbcglobal.net, Aug 8, 2018
    #22
  3. Aug 8, 2018
    ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    2,232
    Try searching eBay for Signal Stat 105 or 102 or 127. There are a few variants there.

    New Old Stock Signal-Stat 102 Push Pull Switch ** FREE SHIPPING ** 724956039920 | eBay

    Illuminated Truck-Lite 102 Lighted Push-Pull Power Switch 724956039920 | eBay

    I would test to see if you have voltage in and out of the switch as well as in and out of your flasher. It is fused with a plastic fuse holder.

    Mine didn't work and looked pretty rough.

    [​IMG]

    I checked for voltage and ended up with a new fuse and holder along with a new flasher and indicator bulb. I exercised the sluggish switch in and out quite a few times. The red plastic looked shot so I polished it with toothpaste and my wife's toothbrush. Worked pretty well. :madwife:

    [​IMG]

    Ok. It was her old toothbrush. ;)
     
    Last edited: Aug 8, 2018
    ojgrsoi, Aug 8, 2018
    #23
    Hellion likes this.
Page 2 of 2
New Posts