1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tool Box Gasket

Discussion in 'Early CJ5 and CJ6 Tech' started by willow green, Mar 25, 2018.

  1. Mar 25, 2018
    willow green

    willow green Member

    Yakima,Wasington
    Joined:
    Jan 21, 2013
    Messages:
    63
    Did the Kaiser jeep tool box under the pass. seat have a gasket or do I need to fab my own from weather stripping?
    Vince
     
    willow green, Mar 25, 2018
    #1
  2. Mar 25, 2018
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,909
    mickeykelley, Mar 25, 2018
    #2
  3. Mar 25, 2018
    Framer Mike P

    Framer Mike P Member

    Hopkinton, NH
    Joined:
    Jan 4, 2016
    Messages:
    218
    Peter Debella lists a seal for it.
     
    Framer Mike P, Mar 25, 2018
    #3
  4. Mar 25, 2018
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,192
    The gasket listed above was originally glued under the perimeter of the lid with contact cement/weatherstrip adhesive. It fit snug up against the lip of the lid.
    -Donny
     
    Keys5a, Mar 25, 2018
    #4
  5. Mar 26, 2018
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,730
    Something to consider about the tool box lid. On my Jeep the tool box lip that is in the top of the tool box has a drain in the back to let water out of the lip. After I put new springs on my Jeep, the back was higher than the front, thus the water in the lip didn't drain. When ever my Jeep got wet inside, rain or washing it out, the water would not drain out of the lip. To fix this I drilled a hole in the front of the lip and through the floor and J B welded a piece of 1/2" PVC water pipe though tool box and out the bottom, any water drains out of the lip now. Just something to consider when it comes to the tool box seal. Good luck.
     
    Rick Whitson, Mar 26, 2018
    #5
  6. Mar 27, 2018
    willow green

    willow green Member

    Yakima,Wasington
    Joined:
    Jan 21, 2013
    Messages:
    63
    Clever! And thanks to all,Vince
     
    willow green, Mar 27, 2018
    #6
New Posts