Need to ID this transmission

JPFlat2a -Jim,
The part number is: 939995 from http://www.vintagejeepparts.com/Parts_Transmission_02.asp

 

Another thought,
I also purchased the t-15 trans mount. From a quick check, this seems to line up pretty well. I wonder if I got a T-15?

 

I just looked at my T14 in the garage. Looks the same. T14 A-1 should be to the left of the top fill plug above that long ridge (technical term)

 

gtolosa
your number is for T86
their is another number shown in book for T14
that number may change/supercede into the 939995
is their a number stamped/molded into the rubber of the mount?
seems to me we had an issue with Crown about their mounts
can't remember what it was though

 

The number on the mount is:939995 - actually this is a sticker, not a stamp. I will call the vendor, maybe they can shed some light.

 

I checked with the vendor on this. They listed part # 939995 or #1370910 for the T-14.
Fortuantely I had ordered both. The 1370910 part fits the trans, it is different than the original, but should work fine. I will need to add a hole or two to the crossmember (guess a few more holes added to the 100 already there wont hurt!).

You can see a rough image of the two mounts at:
http://www.vintagejeepparts.com/Parts_Transmission_02.asp

Related question: Once I took the crossmember off, I see that there is a mount hole on the bottom of the xfer case. But this has not been mounted to the cross member (no hole on the cross member). Pretty strange, does the stock setup have the xfer mounted?

 

That's a T-14. I have two jeeps with the V-6. A '66 with a T-86 and a '69 with a T-14.