1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ventilating windshield seals

Discussion in 'Early Jeep Restoration and Research' started by Facquet66cj5, Feb 13, 2005.

  1. Feb 13, 2005
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    I have one question that I don't know where to direct it towards. I have aquired a ventilating windshield which is complete without the rubber seals. It will fit perfectly on my cj-5. I knew it was a military export option and received some great information so far from the M38 site. They have some great info:

    Just for your info, the M38 was a low hood flat fender L-134 powered jeep produced from Jun 1950 thru Sep 1952. The M38A1 was a CJ5 look alike curved fender F-134 powered jeep built from Jul 1952 thru 1968. They were not supplied with ventillating windshields. These type windshields were optional on the M606, M606A1 and M606A3 as well as the CJ3B, CJ5 & CJ6 from 1954 thru 1972. They are not uncommon.

    I have some pics but they are too large for the site.

    I appreciate any direction you can provide
     
    Facquet66cj5, Feb 13, 2005
    #1
  2. Feb 13, 2005
    GIjivecrew

    GIjivecrew GI Jive

    Somerset, United...
    Joined:
    Feb 8, 2005
    Messages:
    41
    Is the question where do I get a rubber seal from? If so I am also interested in getting hold of one for mine? The botton section of mine is well rusted and I am contemplating cuttinga section out. To do this i need to remove the rubber. Not sure how you do this? :rofl:
     
    GIjivecrew, Feb 13, 2005
    #2
  3. Feb 13, 2005
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    Have yall tried beachwoodcanvas.com , my friend thats restore an MB has found all sorts of hard to find odds and ends from them. HTH
     
    Hawk62cj5, Feb 13, 2005
    #3
  4. Feb 13, 2005
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    I just sent them emails and will let you know what I find. I also sent emails with pics to several other suppliers on an M38 site. If they have them, I will let you know! Any other suggestions are appreciated.
     
    Facquet66cj5, Feb 13, 2005
    #4
  5. Feb 13, 2005
    maxx

    maxx Banned

    Menlo Park, Ca
    Joined:
    Apr 22, 2003
    Messages:
    171
    You might try Brent Mullins Jeep Parts. Google it, the link will come right up. He specializes in military jeep parts.
     
    maxx, Feb 13, 2005
    #5
  6. Feb 13, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126

    The rubber that goes between the inner & outer frame is virtually unobtainable :(. Rumors abound about sources for it, generally along the lines of "I knew a guy who overheard a guy who had a second cousin twice removed who was told by an itinerant South American he picked up hitch hiking in Europe that the stuff is seasonally available from the back door of a part time operation run by a guy who has connections to to some other guy who knows someone working at an obscure rubber fishing lure smanufacturer-"

    The actual glass seal should be stock at any decent windshield shop.

    I'm in the same situation you are, I picked up a NOS frame without the rubber. Its come to the point that I'm considering getting some made up. There was a thread on this , search on "ventilating windshield". The web site posted there for Restoration Specialties, which had something that looked sorta like what is needed, isn't working now :(.

    I'm planning on checking with some local weatherstrippping producers to see if they can duplicate the seal for a reasonable price, but it hasn't had a high enough priority on the "to do list" yet.

    FYI these frames were options on both M38A1s & CJs. They usually showed up on "export" orders headed for dry, dusty parts of the world. The intent of venting appears not to be to keep you cool, it's to break the suction caused by the windshield so the aforementioned dust won't be sucked in & deposited all over the place.

    Here's a cross section scan of the seal I removed from Magnificent just so you can get a feel for what it should look like. The triangular part sticking up fits into the inner frame channel. The part sticking down to the right is what seals against the outer frame. As this is a pretty old dried out sample I'm pretty sure on a new piece this part would have a bit less curve to it, i.e more to the right. The grid squares are 1/4".

    If you do happen to stumle across that guy who knows a guy who heard etc. let us know, lottsa people are looking for this stuff-

    Howard.
     
    Howard Eisenhauer, Feb 13, 2005
    #6
  7. Feb 13, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Hmmm. That looks astonishingly like the weatherstrip seal between the innner/outer windshield frame on my '2A. It came on a roll, and I had to cut the pieces to fit the three sides of the inner windshield frame.

    Check them out at www.surplusjeep.com

    Failing that, I'm sure that Beachwood canvas will have something.
     
    w3srl, Feb 13, 2005
    #7
  8. Feb 13, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    Do tell?

    I had heard somewheres that the Cj2 strip was different from the 3B/5 stripping. I'll check on that- Thanks.

    H.
     
    Howard Eisenhauer, Feb 13, 2005
    #8
  9. Feb 14, 2005
    rocnrol

    rocnrol Member

    calgary alberta,...
    Joined:
    Oct 11, 2004
    Messages:
    170
    i knew about the stuff avaiable for the 2a, but i was thinking that because that windshield has square corners and the 5 has round corners that it wouldnt work. :?
     
    rocnrol, Feb 14, 2005
    #9
  10. Feb 14, 2005
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    891
    OK guys, try this one.

    There was a ventilating windshield for sale on ebay a week or two ago.

    I contacted the seller and asked if he had the seals that go between the inner and outer frames and he said yes, he did.

    Perhaps the fellow didn't know what he was talking about, and maybe he did, but it was Northstar Willys.

    If Northstar truly has them, post a follow up on this thread please.

    Oh, by the way Howard, You mentioned the guy who overheard a guy who had a second cousin twice removed who was told by an itinerant South American he picked up hitch hiking in Europe that the stuff is seasonally available from the back door of a part time operation run by a guy who has connections to to some other guy who knows someone working at an obscure rubber fishing lure smanufacturer-"

    His name is Yahtzee.

    Naturally he has six of them, but is not selling. He also has a warehouse full of WWII jeeps in crates that he is going to sell at some undertermined time. He also has three maps to the Lost Dutchman mine and is living with Judge Crater on an island not far from, oh that other place the name of which escapes my mind at present.

    Good luck!

    kamel
     
    kamel, Feb 14, 2005
    #10
  11. Feb 14, 2005
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    I found one. Surplusjeep.com had one left and I snatched it today. Thanks for the suggestion. I have put about 20 other messages into various restoration sites and will update you if I find more. Thanks for the help.
     
    Facquet66cj5, Feb 14, 2005
    #11
  12. Feb 14, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    Actually I was thinking of that other guy-

    H.
     
    Howard Eisenhauer, Feb 14, 2005
    #12
  13. Feb 14, 2005
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    Howard,
    I spoke to restoration specialties and they have "key" rubber which fits into the channel. Jeff said to measure the depth and width of the groove on the wind shield. He said it should work fine. I received word from 2 other sites and they have nothing. I will let you know on the others.
     
    Facquet66cj5, Feb 14, 2005
    #13
  14. Feb 15, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Cool, I'm glad you found what you were looking for. I completely forgot that the ventilated '5 windshield would be rounded, as opposed to the square frame on my '2A. My bad. Sounds liek a guy could make a nice buck if he could A: Reproduce the ventilated w/s for the '5 and B: come up with a supply of seals for them.

    We'd get the ECJ5 discount though, right? ;)
     
    w3srl, Feb 15, 2005
    #14
  15. Feb 15, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    Yeah, there were some items in RS's catalog that looked close, items 2897A & 2897B grabbed my attention but they curve the wrong way.

    Bummer.

    The problem is that the inner frame sits out 'forward" a bit of the outer , plus it's actually quite a bit smaller than the O.F. opening leaving a really big, well comparatively big anyhow, gap to be filled. If the weatherstrip doesn't curve back enough, out far enough & in the right direction it's not gonna work right. There's a lot of people I've corresponded with who have tried "other" stuff & are not happy with the results :(.

    Another plan (B, actually) is to make something up from neopreneinserted into the inner frame channel & faced on the back with that magnetic rubber sign material to actually "grab" the outer frame.

    I have to much time on my hands when I start coming up with ideas like that :(.


    I did try Beachwood, No Joy there.

    Northstar sent me a picture of thier seal but it doesn't look to me like it would work very well as it doesn't curve back to meet the outer frame, see below. They say they should be getting something else in the near future that may work better, I've asked them to let me know when it shows up.

    H.
     
    Howard Eisenhauer, Feb 15, 2005
    #15
  16. Feb 15, 2005
    Facquet66cj5

    Facquet66cj5 66cjfive

    New York
    Joined:
    Feb 12, 2005
    Messages:
    35
    I got a call from www.surplusjeep.com which siad they can get reproductions for around $45.00. I bought the NOS from them for $90.00. Their number is 1-800-353-3772.
     
    Facquet66cj5, Feb 15, 2005
    #16
  17. Feb 15, 2005
    dlreed

    dlreed 66 CJ5 V6

    Atlanta, Georgia
    Joined:
    Feb 17, 2004
    Messages:
    3
    I'm the guy who bought the ventilating windshield off ebay last week. Northstar Willys sent me a sample of what they have and it is close, but no cigar. I called Beachwood Canvas and they say they have this seal and that it is New and not dried out OEM. It is in their catalog. As per my windshield...it's only money! It is a one piece version instead of a split windshield version. I thought that this might be strange until I saw a picture of it in the Jeep (Kaiser) Accessories brochure. Check out the windshield in the picture that shows the longitudinal rear seats. It is a one piece.
     
    dlreed, Feb 15, 2005
    #17
  18. Mar 28, 2012
    youngjt7144

    youngjt7144 New Member

    Orange City, Florida
    Joined:
    Jan 17, 2012
    Messages:
    17
    Just bought my ventilating windshield rubber seal from http://www.debellajeepparts.com/ He also has NOS ventilating windshield frames for around $800...yes I said NOS! Not a very friendly guy on the phone but your not out to make friends...just buy jeep parts.
     
    youngjt7144, Mar 28, 2012
    #18
  19. Mar 28, 2012
    aallison

    aallison 74 cj6, 76 cj5. Has anyone seen my screwdriver?

    Green Cove...
    Joined:
    Nov 24, 2006
    Messages:
    1,929
    x2 on peter debella. I think my inner rubber was 50 bucks......
     
    aallison, Mar 28, 2012
    #19
New Posts