1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

monarch hy-lo pump innards

Discussion in 'Early CJ5 and CJ6 Tech' started by termin8ed, Oct 30, 2014.

  1. Oct 30, 2014
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Just thought id post this up in case anyone was interested. The front seal on my pump was dumping oil out so time for a seal. I'll have the new seal in the morning. Just 1.000 x .500 x .250. Didnt realize the filter screen was in there. I've got another pump that doesnt have the hy-lo reservoir attached. Just the pump with a small case on it with seperate tank. The guts are the same minus the filter.

    [​IMG]
     
    termin8ed, Oct 30, 2014
    #1
  2. Oct 30, 2014
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    [​IMG]
     
    termin8ed, Oct 30, 2014
    #2
  3. Oct 30, 2014
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,425
    someone waiting for snow :D:D not too much longer . for you guys up north
     
    Twin2, Oct 30, 2014
    #3
  4. Oct 30, 2014
    grinnergetter

    grinnergetter New Member

    NW Indiana
    Joined:
    Apr 13, 2014
    Messages:
    35
    Mine is in exactly the same as in your pics...apart....question for you is how difficult does the shaft spin? Mine seems to have some tight spots and I dont know if that's correct or not.

    Where did you find seals?
     
    grinnergetter, Oct 30, 2014
    #4
  5. Oct 30, 2014
    Jw60

    Jw60 That guy 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,880
    Jw60, Oct 30, 2014
    #5
  6. Oct 31, 2014
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Yea. Shaft spins smoothly. Not sure about the seal I got but it appears to be on enough. I'll give it a try.

    I was checking the generator to see if I could excite the field and noticed the oil all over.
    snow tonight;)
     
    termin8ed, Oct 31, 2014
    #6
  7. Oct 31, 2014
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Dont suppose you remember the part number for the seal?
     
    termin8ed, Oct 31, 2014
    #7
  8. Oct 31, 2014
    grinnergetter

    grinnergetter New Member

    NW Indiana
    Joined:
    Apr 13, 2014
    Messages:
    35
    Thanks for the link jwjeep60 .....hope I didnt step on your thread too much termin8ed.
     
    grinnergetter, Oct 31, 2014
    #8
  9. Oct 31, 2014
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Nope. No problem8)
     
    termin8ed, Oct 31, 2014
    #9
  10. Oct 31, 2014
    Jw60

    Jw60 That guy 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,880
    Felpro 471442 all the part numbers for bearings and seals are in the linked thread.
     
    Last edited by a moderator: Oct 31, 2014
    Jw60, Oct 31, 2014
    #10
  11. Nov 1, 2014
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Saw the bearings but must have missed the seals
     
    termin8ed, Nov 1, 2014
    #11
New Posts