Rock Rails for a Flatfender

Has anyone built rock rails for their flatfender. I am looking for construction ideas or a supplier. All pictures appreciated

 

You can use just about anything for a CJ 5 with a little rework but probably just as easy to make something. This is what I put on the 3B-wanted something not too obnoxious. They are bolted (flat head allens) through to a 1.5" square tube structure under the tub which is in turn bolted to the frame. I end up hitting my exhaust skids before I get to the tub so they really haven't been load tested.....

 

Not as cool as the ones shown from Montana, but here are mine.

 

I assume the side plates are angle iron and the 1.5 " tubing acts as a spacer for the pinch seam.

AWESOME job on the exhaust protectors. My exhausts, V-6 with side dumps are in the same location. Want to build another set?

JHS

jhs9634@gmail.com

 

In that application, the floor is actually recessed another 1.5" into the tub (glass) so there is nearly an inch and a half of pinch seam, and some of the 1.5" square tube bridges both frame rails (seat brackets bolted through to those also). And no, I really wouldn't want to build another set of the exhaust skids-takes forever to drill all those holes-even with a mill. Just coming up with a decent plan took awhile.

 

Those hangers are super cool.
If you dont want to build any more, would you want to share the plans?