1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

steering column

Discussion in 'Early CJ5 and CJ6 Tech' started by SpartanCJ, Aug 11, 2013.

  1. Aug 11, 2013
    SpartanCJ

    SpartanCJ Member

    Chardon Ohio
    Joined:
    Jun 29, 2013
    Messages:
    78
    What ideas do you guys have. Seems my Steering Column may have the threads bunged up for the nut that holds down the steering wheel. Could be the nut. Anybody have the same problem ever?
     
    SpartanCJ, Aug 11, 2013
    #1
  2. Aug 11, 2013
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    The bet plan is to pull the shaft from the box & have it re threaded on a lathe.

    Failing that you can try cleaning the threads up with a three cornered file- plan on taking an hour or two to do it right.

    If the treads are really messed the shaft may not be salvageable.


    H.
     
    Howard Eisenhauer, Aug 11, 2013
    #2
  3. Aug 11, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784

    What year are you dealing with?......................You need to determine whether or not the shaft has a problem or the nut?.............big difference when making that repair...........Pictures would be nice!

    OK it's a 69 with a 76 windshield? Pictures.......Please
     
    Last edited: Aug 11, 2013
    tarry99, Aug 11, 2013
    #3
  4. Aug 12, 2013
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Year/model? Original Ross steering?

    I would be inclined to replace parts rather than try and repair the shaft. Lots of discarded Ross steering setups out there.
     
    timgr, Aug 12, 2013
    #4
  5. Aug 12, 2013
    SpartanCJ

    SpartanCJ Member

    Chardon Ohio
    Joined:
    Jun 29, 2013
    Messages:
    78
    Its a 69 steering Column. I do believe its the shaft.
     
    SpartanCJ, Aug 12, 2013
    #5
  6. Aug 12, 2013
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    Howard Eisenhauer, Aug 12, 2013
    #6
  7. Aug 12, 2013
    Steve's 70-5

    Steve's 70-5 Active Member

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,383
    If it has Ross Steering and has a V-6, the parts are the same as a M38A1 Jeep
     
    Steve's 70-5, Aug 12, 2013
    #7
  8. Aug 12, 2013
    Mike S

    Mike S Sponsor

    Cameron Park Ca.
    Joined:
    Oct 6, 2009
    Messages:
    811
    You can get a file specifically made to repair threads, they are square and double ended----gives 8 different thread pitches, so you should be good. Check with a local machine shop, they may lend you one???

    Here is one, that happens to be metric, but they are available in American also.

    [​IMG]
     
    Mike S, Aug 12, 2013
    #8
  9. Aug 12, 2013
    SpartanCJ

    SpartanCJ Member

    Chardon Ohio
    Joined:
    Jun 29, 2013
    Messages:
    78
    Its a v6 Jeep. I am going to try to file the threads. Wish I had some way to "cut" a new thread path.
     
    SpartanCJ, Aug 12, 2013
    #9
  10. Aug 12, 2013
    Long&Low

    Long&Low Active Member

    Geauga County, OH
    Joined:
    Dec 13, 2009
    Messages:
    1,212
    I got a spare column sitting in my barn, and I'm like 10 minutes from you. Send me a PM.
     
    Long&Low, Aug 12, 2013
    #10
  11. Aug 13, 2013
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,186
    x2 on the thread file. It's a good tool to have, mine has saved mybacon more than once.
     
    colojeepguy, Aug 13, 2013
    #11
  12. Aug 16, 2013
    SpartanCJ

    SpartanCJ Member

    Chardon Ohio
    Joined:
    Jun 29, 2013
    Messages:
    78
    Im kind of debating just pulling ALL the steering components and doing some type of upgrade. Ive read the Saginaw stuff on here, any ideas from you guys?
     
    SpartanCJ, Aug 16, 2013
    #12
  13. Aug 18, 2013
    SpartanCJ

    SpartanCJ Member

    Chardon Ohio
    Joined:
    Jun 29, 2013
    Messages:
    78
    Ok, my Columns threads are buged up. The play in the steering is VERY bad anyhow. I believe I am going to up grade with a different Column, Gear box etc. Any suggestions on a route I should go? Power steering? Mostly I am looking for a good source for Columns, gear box (pwer vs Man) and perhaps pumps. Any help is appreciated. Seems that their is so much stuff on the Saginaw I try reading it all and am left kind of dazed. I have no problem going to NAPA and getting a Box but can anyone make a suggestion? Thanks
     
    SpartanCJ, Aug 18, 2013
    #13
New Posts