1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Driver side floor photo

Discussion in 'Early CJ5 and CJ6 Tech' started by GunTroll-6'r, Oct 6, 2012.

  1. Oct 6, 2012
    GunTroll-6'r

    GunTroll-6'r Member

    Springfield, TN
    Joined:
    Jul 19, 2012
    Messages:
    87
    What does a correct original driver side floor look like around the clutch and brake area. I have a 70.

    The PO did some moding. I'd like to get it right without the rigging.

    Need a photo please.
     
    GunTroll-6'r, Oct 6, 2012
    #1
  2. Oct 6, 2012
    supertrooper

    supertrooper Member

    moreno valley, ca
    Joined:
    Nov 12, 2007
    Messages:
    753
    [​IMG]
     
    supertrooper, Oct 6, 2012
    #2
  3. Oct 7, 2012
    GunTroll-6'r

    GunTroll-6'r Member

    Springfield, TN
    Joined:
    Jul 19, 2012
    Messages:
    87
    Hey thanks!

    One more question

    When finished how are the holes that the cutch and brake pedal pass through "sealed" ?

    Again the PO did some rigging to attempt to stop drafts but it looks horrible.
     
    GunTroll-6'r, Oct 7, 2012
    #3
  4. Oct 7, 2012
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    Howard Eisenhauer, Oct 7, 2012
    #4
  5. Oct 7, 2012
    GunTroll-6'r

    GunTroll-6'r Member

    Springfield, TN
    Joined:
    Jul 19, 2012
    Messages:
    87
    I've seen those, just curious how it looks properly installed and based off of a proper image, if I can get mine there from what I have now.
     
    GunTroll-6'r, Oct 7, 2012
    #5
  6. Oct 7, 2012
    noahlon

    noahlon Old Fart

    Pine Ridge, AR
    Joined:
    Dec 22, 2010
    Messages:
    206
    [​IMG]

    Here's my '68
    Don't have the pass thru seals installed.
     
    noahlon, Oct 7, 2012
    #6
  7. Oct 7, 2012
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    There is also supposed to be some kind of light spring that holds the pads away from the 90ยบ bend in the pedal arms.
     
    1960willyscj5, Oct 7, 2012
    #7
  8. Oct 8, 2012
    GunTroll-6'r

    GunTroll-6'r Member

    Springfield, TN
    Joined:
    Jul 19, 2012
    Messages:
    87
    What do these look like? Been googling but not finding it.
     
    GunTroll-6'r, Oct 8, 2012
    #8
New Posts