Tommy B's rotisserie

I'am ready to order the steel to bulid this, just wanting to find out from the guys that have built this if there any thing they would change, add,etc. I did a search and I didn't find anything.

Thank you.
Dan.

 

When I build mine, I'm going with much larger wheels, probably 6" to 8" pneumatics, so I can roll it in and out of the garage easier.

 

x2 on the larger wheels...

Don

 

Just for the record,I got a pm from Posimoto,and he said he that he wouldn't change any thing,that it was perfect,I think I'll put bigger wheels on it,I'll see.
Thanks guys.

 

Depends on the surface you have to roll it on. I have a concrete floor in the shop and asphalt parking out front so the smaller wheels worked fine. I think I used 3" wheels with locks. Be sure you have at least 2 locking wheels. Four is better.

 

In the larger scheme of things, wheels are cheap. And even the seams in my garage floor will stop 3" wheels and give me grief. Rolling my junk in and out of the garage is impossible, with the gap/step between the floor and the driveway. Bigger is better, IMO.