1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Winch bumper

Discussion in 'Builds and Fabricators Forum' started by DanStew, Mar 6, 2010.

  1. DanStew

    DanStew Preowned Merkin salesman Staff Member

    Does anyone have a roller fairlead around to give me a measurement? I am making a winch bumper and I do not have a fairlead yet and I need to cut an opening in a front piece of metal that will mount the fairlead. I jsut need to know what size opening i need to make.

    Thanks!!
     
    DanStew, Mar 6, 2010
    #1
  2. Mike C

    Mike C Member

    Mike C, Mar 6, 2010
    #2
  3. EricM

    EricM Active Member

    The harbor freight fairlead has some dimensions:

    http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=44584

    [​IMG]
     
    EricM, Mar 6, 2010
    #3
  4. DanStew

    DanStew Preowned Merkin salesman Staff Member

    You guys are killing me with the Millimeter stuff ;)

    THANKS!!!! :)
     
    DanStew, Mar 7, 2010
    #4
  5. EricM

    EricM Active Member

    We don't want to be accused of inaccuracy!




    :)
     
    EricM, Mar 7, 2010
    #5
  6. neptco19

    neptco19 That guy....



    It is going on a yota right?? :D
     
    neptco19, Mar 7, 2010
    #6
  7. mdbeck1

    mdbeck1 55 Willys CJ5

    Look at the HF link. It gives it in SAE units.

    of course they measured it to the closest 1/64th.
     
    mdbeck1, Mar 7, 2010
    #7