1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

what throwout bearing for a v6?

Discussion in 'Flat Fender Tech' started by wannagpw, Dec 8, 2009.

  1. wannagpw

    wannagpw New Member

    I have a T90 & am doing a 77 buick V6 conversion.
    I got a Napa clutch kit # MU 5469-A1 & the Throwout bearing inside dia is to small.
    I have the ten spline long shaft on the T 90 & the input shaft retainer housing is 1.5 od , But the throwout bearing Id is 1.375.
    What throwout bearing is the right one?
    Thankyou for your time...Tom
     
    wannagpw, Dec 8, 2009
    #1
  2. kaiser_willys

    kaiser_willys Well-Known Member

    from doing a quick search it appears to use a standard chevy throw out bearing, HTH
     
    kaiser_willys, Dec 8, 2009
    #2
  3. wannagpw

    wannagpw New Member

    Any Idea for what chevy?
    I know the parts guy had no clue when we discovered that the buick throwout bearing wouldn't work.
     
    wannagpw, Dec 8, 2009
    #3
  4. Warloch

    Warloch Did you say Flattie??? Staff Member

    Warloch, Dec 8, 2009
    #4
  5. wannagpw

    wannagpw New Member

    Good idea...
    Thanks again for all your help.
     
    wannagpw, Dec 9, 2009
    #5