1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Centerforce Clutch ISSUES!!!!!!!!!!!!

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Sep 14, 2004.

Page 2 of 2
  1. James P. Enderwies

    James P. Enderwies Sponsor

    Dan, I agree. And I have a Centerforce set up and am totally happy with it, but I have a stock 225 set up.

    I'd try to call them frist though and see what they say. Just out of curriosty.
     
    James P. Enderwies, Sep 15, 2004
    #21
  2. DanStew

    DanStew Preowned Merkin salesman Staff Member

    Only reason i am not taking it back or sending it back is that it is not a "set" they state that all their parts are macthed for each other so if i try to get money back they are going to say, oh of course it is not going to work because it is not made for each other. So since i used it, they cant resell it. :( Actaully i am not that upset to take the weights off and have a stock setup. eck i would ahve to buy a "kit" to get the 225 stock pressure plate because everyone sells the parts as kits and not individually. Heck if taking the weights off for some reason not fix the problem i can put the weights back on and sell the PP to somebody that could use it, then get the stock kit. :( I understand though what you are saying guys, but right now i am so fed up i just want the jeep to work, i am willing to take the loss. This isnt going to hurt as bad, like if i kept that $180 master cylinder ;)
     
    DanStew, Sep 15, 2004
    #22
  3. Glenn

    Glenn Kinda grumpy old man Staff Member

    Good luck Dan, hope it works.
     
    Glenn, Sep 15, 2004
    #23
  4. DanStew

    DanStew Preowned Merkin salesman Staff Member

    oh so do i
     
    DanStew, Sep 15, 2004
    #24
  5. Posimoto

    Posimoto Hopeless JEEP Addict

    I think we need to start a poll to see who has R&R'd a tranny the most times in one day. I've done three times out and in. I did mine with the Xfer case attached.
     
    Posimoto, Sep 16, 2004
    #25
  6. DanStew

    DanStew Preowned Merkin salesman Staff Member

    Oh man i cant imagine having to take the dana 18 off first, now that would be a PIA.
     
    DanStew, Sep 16, 2004
    #26
Page 2 of 2