1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fixed: V6 Cutting out at cruising speeds?

Discussion in 'Early CJ5 and CJ6 Tech' started by sparky, May 14, 2006.

  1. Hippo393

    Hippo393 Jeepless

    Yeah!! What MOP said. :evil:
     
  2. Glenn

    Glenn Kinda grumpy old man Staff Member

    :iagree: Some people have all the nerve! R)
     
  3. Glenn

    Glenn Kinda grumpy old man Staff Member

    Anybody else agree? :twisted:
     
  4. Patrick

    Patrick Super Moderator Staff Member

    What're you getting at?:?
     
  5. jpflat2a

    jpflat2a what's that noise?

    I was simply presenting an obvious soloution to a most difficult problem
    anyone else agree ?????
     
  6. Glenn

    Glenn Kinda grumpy old man Staff Member

    Mop's paddin!
     
  7. Glenn

    Glenn Kinda grumpy old man Staff Member

    Can we start over, I forgot what the problem was. :oops:
     
  8. Patrick

    Patrick Super Moderator Staff Member

    Lessee, Sparky's Jeep...............
     
  9. jpflat2a

    jpflat2a what's that noise?

    if we do that, will we get to the soloution that much quicker ?
     
  10. jpflat2a

    jpflat2a what's that noise?

    okay, let's do it.

    Sparky: my Jeep cuts out at highway speeds in 3rd gear, what could it be ?

    Glenn, Patrick, and Jim: you should replace the carb base gasket

    there, that was easy !
     
  11. Patrick

    Patrick Super Moderator Staff Member

    Needs a carb base gasket
     
  12. Patrick

    Patrick Super Moderator Staff Member

    See? :D
     
  13. Patrick

    Patrick Super Moderator Staff Member

    Dammit Sparky, we told you so! :D
     
  14. Glenn

    Glenn Kinda grumpy old man Staff Member

    :oops: Sorry, got distracted by work. I'm thinking carb gasket just a bit too small, causing a vacuum leak that's kinda hard to catch due to the location. :D
     
  15. BlueFlu

    BlueFlu past owner of some ecj5's

    I think the crank needs a zipper. :D
    I mean think about it for a second, the cam gets a button, so why shouldn't the crank get a zipper? :D
     
  16. Glenn

    Glenn Kinda grumpy old man Staff Member

    Resisting urge take advantage of wording in reply. :twisted:
     
  17. Boyink

    Boyink Super Moderator Staff Member

    I can think of several cranks that need a zipper....R) R)
     
  18. mb82

    mb82 I feel great!

    So was Sparky's problem caused by the lack of cam button or was it caused by the carb gasket? I never did hear the truth. Then again did Sparky ever really have a problem? that is the question we should be asking.
     
  19. Glenn

    Glenn Kinda grumpy old man Staff Member

    Carb gasket.
     
  20. jd7

    jd7 Sponsor

    <snicker>