1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 18 rebuild tools

Discussion in 'Builds and Fabricators Forum' started by Mcruff, Mar 22, 2006.

  1. Mcruff

    Mcruff Earlycj5 Machinist

    I have had a few people ask about this so here it is.

    For those of you who have the ability at work or home to make
    some tools for this job these will make it much easier to reasemble the transfercase when you're ready. All of these tools but one are made from aluminum, brass or copper. The lone exception is the bearing tool and its made of PVC pipe. If you make these tools the dimensions marked with
    an * need to be held fairly close the others are whatever. The intermediate dummy shaft can be made of wood though. These images can be saved and enlarged thru paint and most photo editors.
     
    Mcruff, Mar 22, 2006
    #1
  2. Mudweiserjeep

    Mudweiserjeep JEEP: Bouncy and Fun

    Thanks Mike!
     
    Mudweiserjeep, Mar 22, 2006
    #2
  3. Evans

    Evans Former YJ owner

    Awesome !! Thanks Mike !!
     
    Evans, Mar 22, 2006
    #3
  4. RedWing

    RedWing Member

    Thank you very much.
     
    RedWing, Mar 23, 2006
    #4
  5. Evans

    Evans Former YJ owner

    Mike thanks for the drawings , finally got some time to run into work to do some goverment work...
     
    Evans, Apr 14, 2006
    #5