1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Stock measurement needed

Discussion in 'Flat Fender Tech' started by w3srl, Sep 15, 2005.

  1. w3srl

    w3srl All-around swell dude Staff Member

    Would one of the flattie guys be kind enough to take a quick measurement for me?

    I screwed up my saginaw install and mounted the postal column without checking the height of the steering wheel in relation to the driver's seat. I'm only 5"8" and now I have to **** my knee out of the way in order to get my foot onto the brake / clutch pedals.

    Would somebody be kind enough to tell me what the distance between the floorboard and the backside of the steering wheel is on a stock flatfender?

    Thanks in advance,

    Steve :beer:
     
    w3srl, Sep 15, 2005
    #1
  2. michigan_pinstripes

    michigan_pinstripes I'm not lost, I'm wandering

    michigan_pinstripes, Sep 15, 2005
    #2
  3. sasquatch

    sasquatch I'm big in Japan.

    I knew that was gonna show up... :rofl: :rofl:
     
    sasquatch, Sep 15, 2005
    #3
  4. jd7

    jd7 Sponsor

    floor to lowest part of steering wheel underneath = 28"
     
    jd7, Sep 15, 2005
    #4
  5. w3srl

    w3srl All-around swell dude Staff Member

    Thanks David!
     
    w3srl, Sep 15, 2005
    #5