1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch Question

Discussion in 'Flat Fender Tech' started by garage gnome, May 8, 2022.

Page 2 of 2
  1. Cj5dale

    Cj5dale Member 2023 Sponsor 2022 Sponsor

    Yep. I was just curious if there was something else that caused the misalignment that I need to avoid.

    definitely planning on using the alignment tool or the shaft out of transmission oldpappy gave me.
     
    Cj5dale, Jun 30, 2022
    #21
  2. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor


    I had a CJ5 with a 258 and a 4-speed that continually jumped out of gear, even after a transmission rebuild.

    Finally found the bell-housing was out of true. When I aligned it using a dial indicater and some beer-can shims it fixed the problem.
     
    PeteL, Jun 30, 2022
    #22
    w3srl and Cj5dale like this.
  3. garage gnome

    garage gnome ECJ5 welder

    The custom TDI adapter to the bell housing was off.
     
    garage gnome, Jun 30, 2022
    #23
    Ol Fogie likes this.
  4. w3srl

    w3srl All-around swell dude Staff Member

    I don't remember seeing the build thread on the TDI..
     
    w3srl, Jul 8, 2022
    #24
  5. garage gnome

    garage gnome ECJ5 welder

    garage gnome, Jul 9, 2022
    #25
Page 2 of 2