1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

M38 Where Do These Go?

Discussion in 'Flat Fender Tech' started by 52M38-73CJ5, Jan 22, 2022.

  1. 52M38-73CJ5

    52M38-73CJ5 Member

    These came from near the front of my oil pan. I cannot remember how they go back. Does anyone have photos?
    upload_2022-1-22_16-23-13.png
     
    52M38-73CJ5, Jan 22, 2022
    #1
  2. Tom in RI

    Tom in RI Member

    They are held by the lower 4 engine/bellhousing bolts. One on each side pointing up 2 oclock, 10 oclock. They fit above the rear lip of the engine skid plate. I can shoot a pix tomorrow if you need it.
     
    Tom in RI, Jan 22, 2022
    #2
  3. 52M38-73CJ5

    52M38-73CJ5 Member

    Tom
    Thanks for your help. Ran out to the shop to lay them out and all makes sense. Finally the paint lines line up. I can sleep tonight.
     
    52M38-73CJ5, Jan 22, 2022
    #3
  4. 52M38-73CJ5

    52M38-73CJ5 Member

    In case this helps anyone
    upload_2022-1-24_20-8-30.jpeg
     

    Attached Files:

    52M38-73CJ5, Jan 24, 2022
    #4
    Fireball likes this.