1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rocky Road Outfitters Shock Mounts

Discussion in 'Builds and Fabricators Forum' started by Iandavidh, Sep 25, 2020.

  1. Iandavidh

    Iandavidh Member

    59A88E35-A5ED-43AB-8528-028D18DDB3C7.jpeg Anyone use these before? They tout the advantages over the ford mounts and are only $20 more expensive. I’m only on a 2.5 lift are these going to be too high up?
     
    Iandavidh, Sep 25, 2020
    #1
  2. Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    I have them on my CJ w YJ springs. ProComp 2.5” lift. I really like them. Don’t think the stock shocks could give near enough travel for my setup.
    Don’t weld them on until very last. Use rear shock mounts.
    I have no idea if there is advantage over any other mounts.
     
    Buildflycrash, Sep 25, 2020
    #2
  3. Iandavidh

    Iandavidh Member

    Sounds good!


    What do you mean?
     
    Iandavidh, Sep 25, 2020
    #3
  4. Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    The spring plates from RR have two shock mounts. One in front of the axle, one behind.
     
    Buildflycrash, Sep 25, 2020
    #4
  5. Iandavidh

    Iandavidh Member

    Oh oh oh gotcha
     
    Iandavidh, Sep 25, 2020
    #5
  6. rejeep

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Just get a pair of CJ front shock mounts. They bolt on as well...
     
    rejeep, Sep 25, 2020
    #6
  7. cayenne

    cayenne Member

    I’ve got those rr mounts sitting on my workbench right now. Do you have any pictures of how you have it installed? Did you have to cut up your fender well?
    Thanks!
     
    cayenne, Sep 25, 2020
    #7
  8. Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Sloppy welds on mine. I recently had to cut off the top and flipped it so I could use the rear mount. Gave more clearance for my new fat shocks.

    [​IMG]
     
    Buildflycrash, Sep 25, 2020
    #8
  9. 73 cj5

    73 cj5 Not ready for the junkyard yet

    If you're worried about shocks you can measure for them.
     
    Last edited: Sep 26, 2020
    73 cj5, Sep 25, 2020
    #9
  10. Iandavidh

    Iandavidh Member

    I ordered them up so they’ll be here sometime next week I believe, we’ll see how they work(y)
     
    Iandavidh, Sep 26, 2020
    #10